The most common use of bar code scanners, and the one that most people are aware of, is the scanning of groceries at a grocery store. At the teller the bar code of each package is run past a barcode scanner that tells the system what the item is. The stock control system then feeds back item details and price information to the teller. The cost is automatically added to your bill.

When the stock control system tallies a purchase, no matter what is actually sold, the inventory records in the central database are simultaneously modified to record the fact that the item has been purchased. If your inventory information was correctly entered into the system when you set it up, inventory control occurs without the need for manual counting or recording of purchases.

The first step towards installing a stock control system is to install the software that is going to keep track of information about your inventory. You will use bar code scanners in order to get the information about your inventory into the system. Each time you scan an item it changes its count in the database.

A system like this one can generate different bar codes for items that need them. The software will create a one of a kind bar code for each new item. The bar code printer will then print the code label which is then placed on the item.

The three most prevalent kinds of bar code scanners available now are:

1. The Wand Scanner – The most basic type of bar code scanner is the “wand”. This is a pen-type scanner that needs to be kept in contact with the bar code when scanning it. The wand emits a light which is reflected off the bar code and then decoded by the system to identify the item.

The wand system works well in most applications, and it is by far the least expensive type of bar code scanner. A typical wand costs about 1/10th the price of a laser gun, and about 1/5th the price of a CCD scanner.

There are limitations to wand scanners, however. The wand needs to be held at a fairly specific angle when pointed at the barcode in order for it to scan properly. Also, the speed with which it is moved across the barcode can’t be too fast or too slow. Additionally, there is a limit to the resolution of every barcode wand scanner. The scanner will not be able to read properly any barcode that has a resolution that is significantly smaller than the scanner itself. For example, a 5 mil barcode cannot be read using a 10 mil wand. When in the market for a wand scanner, it is important that this isn’t forgotten.

2. CCD Scanners – CCD stands for charged coupled device. This type of scanner normally costs less than a laser scanner, and it is a very accurate alternative system for scanning bar codes. Both the wand scanner and the CCD reader have to be in physical contact with the bar code if they are to read the label. However, the CCD reader doesn’t have to be moved, waved, or slid across the label like the wand scanner. The user can just touch the reader to the bar code and pull the trigger to activate the scanner.

Of all the different types of bar code scanners, CCD readers are considered the most straight-forward to use. They are manufactured in widths that start at about 2 and go up to 4 inches. A CCD reader is expensive compared to a wand (about four times the cost), but is a bargain compared to the laser scanner (about one third the cost).

A promising new technology similar to CCD is called FFO (Fixed Focus Optics). These scanners are non-contact readers, which means they can read bar codes from as much as 20″ away. They will also be able to read two-dimensional bar codes as they become more popular.

3. The Laser Scanner – Laser scanners use a beam of light to rapidly scan across the bar code label. This means the scanner itself remains stationary, and there is no need for direct contact with the bar code label. Scanning is automatic in the sense that the scanning action is initiated when an object is held in front of it.

Such a system has benefits in a variety of situations. For instance, because the scans are accomplished with great speed, it is possible to embed laser scanners inside of conveyor systems. When items pass by rapidly, scanning takes place automatically. In a retail environment, the clerk merely moves each item over the glass to engage the scan. Such a system can easily keep pace with a clerk who simply moves objects from one side of the scanner to the other other. Laser systems are much more rapid and accurate than any other widely-used alternative.

No matter what your ideal scanning system might be today, you need to make certain that you buy a stock control system that allows you to take advantage of future developments in bar code technology. This will allow you to keep your system updated without having to replace the entire system in the future.

Share This